Moog
Messages : 2 Date d'inscription : 18/07/2010
| Sujet: Bumper Evo IX/VIII Dim 8 Aoû - 17:24 | |
| Salut, je suis nouveau dans le monde des Evo, et je voulais savoir si le bumper d'une evo IX etais bolt on sur une evo VIII car jai vu sur le site de AMS un bumper avec lip pour IX mais c'est inscrit que ca peut faire sur une VIII aussi celui-ci : [Vous devez être inscrit et connecté pour voir ce lien]donc les bumper OEM sont-ils interchangeables? aussi auriez vous une référence pour conaitre toutes les difference entre les Evo VIII et IX et tout ce qui est semblable, que ce sois coté mecanique/suspension/carosserie Merci | |
|
Raptord
Messages : 120 Date d'inscription : 05/02/2010
| Sujet: Re: Bumper Evo IX/VIII Dim 8 Aoû - 23:34 | |
| Je crois que c'est bolt-on mais je ne peux pas le garantir, desoler! | |
|
Thrice
Messages : 29 Date d'inscription : 31/05/2010
| Sujet: Re: Bumper Evo IX/VIII Lun 9 Aoû - 0:46 | |
| je sais pas si ca peut t'aider, [Vous devez être inscrit et connecté pour voir ce lien] - Citation :
- Alright, since I just went to the Mitsubishi dealership today and purchased all the parts necessary to do the VIII to IX front bumper conversion, I figured I would do everyone a favor and post all the necessary part numbers from Mitsubishi. These part numbers are for the USDM front bumper that doesn't have those annoying holes punched through them like the JDM bumpers. Be aware that these come unpainted also... only JDM bumpers come painted from the factory. The only color available painted from the US is the White.
These are the part numbers for all the body pieces and mesh pieces you will need. All other parts are swappable from the VIII bumper to the best of my knowledge. I hear some people are swapping the lower meshes from the VIII with modification, but if you don't want to bother, then the part numbers are listed. Also, the upper center mesh is almost mandatory as it contains a bracket for the bumper to mount up to the bumper reinforcement, so I wouldn't forego that one. If something changes with the body shop, I'll update this post.
6400B002WA- Front Bumper Cover 6512A149WA- Lip Spoiler 6400B288- Additional part of the Lip Spoiler for the passenger side 6402A033- Upper Center Mesh (where badge goes) 6400A384- Lower Center Mesh (covers intercooler) 6400A390- Duct for Oil Cooler 6400A391XA- Cover for bolt on left side of intercooler 6400A392XA- Cover for bolt on right side of intercooler 6402A023- Lower Left Mesh 6402A024- Lower Right Mesh
All these pieces at list cost will run you around $1500.00, but if you can get the body shop pricing or a discount from some of our Mitsubishi Dealership vendors then it should run you around $1175.00 or so. That's it. plein d'information sur les différence : [Vous devez être inscrit et connecté pour voir ce lien] | |
|
Moog
Messages : 2 Date d'inscription : 18/07/2010
| Sujet: Re: Bumper Evo IX/VIII Lun 9 Aoû - 17:47 | |
| Merci ca me donner deja une bonne idée
a+ | |
|
Contenu sponsorisé
| Sujet: Re: Bumper Evo IX/VIII | |
| |
|